Aerocheck – Eddy Current Flaw Detectors
Rp1.850.000.000
The AeroCheck+ is the follow on Eddy Current (EC) Flaw Detector from the AeroCheck. The AeroCheck+ offers the same features as the original AeroCheck, including Rotary Capabilities as standard, but in addition offers Dual Frequency with Auto-mix and Conductivity Measurement as well as an outstanding Frequency Range from 20Hz to 12.8MHz.
Auto-mix simplifies the sometimes complex procedure of mixing two different frequency signals and can be achieved on the AeroCheck+ through a series of easy steps. Setting the Auto-mix itself is as simple as pressing one key.
Designed and manufactured in the UK, the AeroCheck+ comes with the ETher NDE promise of outstanding customer service and technology that is both reliable and advanced.
18 in stock
Specification
| AeroCheck2 | AeroCheck+ | ||
| Probe | Connectors | 12 Way Lemo 2b (Absolute, Bridge and Refection) and Connection Lemo 00 (for single element absolute probes) | Simultaneous probe operation possible using Lemo 12 way and Lemo 00 |
| Rotary | 600-3000 rpm – ETher Mercury Drive (ADR002), Hocking 33A100, Rohmann MR3, SR1 and SR2 Drive (special adapter needed) | ||
| Frequency | Single Freq. = 10Hz – 20MHz with range variable resolution | Dual Freq. = 10Hz – 12.8MHz & Mix -18 to +18dB on output | |
| Gain | Overall | -18 to + 104dB, 0.1, 1 and 6dB steps (104dB maximum) 0dB or 12dB 0dB, 6dB and 10dB (0dB reference 1mW into 50 ohm). +/-100.0 dB | |
| Input Gain | 0dB or 12dB | ||
| Drive | 0dB, 6dB and 10dB (0dB reference 1mW into 50 ohm) | ||
| Max. X/Y Ratio | +/-100.0 dB | ||
| Phase | Range | 0.0-359.9°, 0.1° steps | |
| Auto Phase | Allows phase angle to be automatically set to a pre set angle | ||
| Filters | Normal High Pass | DC to 2kHz or Low Pass Filter, which ever is the lower in 1 Hz steps. Plus variable adaptive balance drift compensation 0.01 – 0.5 Hz (6 steps) | |
| Normal Low Pass | 1Hz to 2kHz or a quarter of the lowest test frequency, which ever is lower in 1 Hz steps. | ||
| Balance | Manual | 14 internal balance loads; 2.2μH, 5.0μH, 6.0μH, 6.5μH, 7.0μH, 7.5μH, 8.2μH, 12μH, 15μH, 18μH, 22μH, 30μH, 47μH, 82μH | |
| Automatic | Optimised balance load selection | ||
| Alarms | Box Sector Output | Fully configurable, Freeze, Tone or Visual. . | |
| Sector | Fully configurable, Freeze, Tone or Visual | ||
| Output | Open collector transistor (32v dc at 10mA max) available on 12 way Lemo | ||
| Display | Type | 5.7” (145mm), 18 bit Colour, daylight readable | |
| Viewable Area | 115.2mm (Horizontal) x 86.4mm (Vertical) | ||
| Resolution | 640 x 480 pixels | ||
| Flip | Manual or automatic screen orientation change to enable left or right handed use | ||
| Colour Schemes Configurable | User configurable Dark, Bright and Black & White | ||
| Screen Display Modes | Full Screen, Single, Dual Spot or Dual Pane with variable size and location and function e.g. MY, Timebase, Waterfall and Meter. Spot, Time base (0.1-20 seconds x 1-200 sweeps and up to 55 seconds), Waterfall and Meter with peak hold and % readout | ||
| Graticules | Choice of Grid (4 sizes 5, 10, 15 and 20% FSH), Polar (4 sizes 5, 10, 15 and 20% FSH) or none | ||
| Offset | Spot Position: Y =-50 to +50, X =-65 to +65% | ||
| Digital Spot Position Readout | Display in X,Y or R,θ | ||
| Summary | Legacy Format | ||
| Removable Data Storage | Setup | micro SD up to 32GB, holding over 10,000 settings | |
| Stored Screen Shots | micro SD up to 32GB, holding over 10,000 screen shots | ||
| Record/Replay | Comprehensive Record Replay and Storage. Realtime recording of trace data and Replay on instruments and desktop PC up to 164 seconds | ||
| Outputs | PC Connectivity | USB (Full PC remote control plus Real Time data) | |
| Digital Volt Free Alarm | Available on Lemo 12 way, Open collector transistor (36v dc at 10mA max) | ||
| VGA | Full 15 way VGA output | ||
| Languages | English, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Turkish, Czech, Norwegian | ||
| Verification Level | The system includes on delivery a 2 year validity Verification Level 2 detailed functional check and calibration as per ISO 15548-1:2013 | ||
| Power On Self Test | The system performs a self test on start up of external ram, sd ram, accelerometer, Micro SD card, LCD screen buffer. | ||
| Power | External | 100-240 v 50-60Hz 30 Watts | |
| Battery | Internal 7.2V nominal @ 3100mAh = 22.32 watch | ||
| Running Time | Up to 8 hours with a 2MHz Pencil Probe 30% Back Light and up to 6 hours with a Rotary Drive at 3000rpm 50% duty cycle | ||
| Charging Time | 2.5 hrs. charge time – Simultaneous charge and operation possible | ||
| Physical | Weight | 1.2 kg, 2.7 lbs | |
| Size (w x h x d) | 237.5mm x 144mm x 52mm / 9.4” x 5.7” x 2.1” | ||
| Material | Aluminium alloy Mg Si 0.5 powder-coated | ||
| Operating Temperature | -20 to +60 °C Storage for up to 12 months -20 to +35 °C Nominal +20 °C | ||
| Storage Temperature | Storage for up to 12 months -20 to +35 °C Nominal +20 °C | ||
| IP Rating | 54 | ||
| Conductivity Specification + version only | ||
| Frequency | One frequency only 60kHz standard (choice of 120, 240 and 480kHz) | |
| Resolution | 3 decimal points max | |
| Auto Resolution Mode AutoS = Legacy Instrument, Auto = SigmaCheck | ||
| Acccuracy | 0.5%-10% IACS better than +/-0.05% IACS 10%-25% IACS better than +/-0.25% IACS 25%-60% IACS better than +/-0.5% IACS 60%-110% IACS better than +/-1% IACS Lift Off corrected to 1.0mm No temperature compensation All Errors at 90% Confidence Level | |
Related products
WeldCheck 3
Rp0
WeldCheck – Eddy Current Flaw Detector
Rp1.850.000.000